Loading ...
Loading ...
Loading ...
33
EN
2. Lower the control panel at the front by carefully pulling it downwards. You can now
access the light module and terminals. Replace the lamp (commercially available
LED lamp, max. 1.5 W).
Ø Max. Power
(Watt)
Voltage
(Volt)
Picture Lamp
Cap
ILCOS D
code
70 mm 1,5 W DC 12 V - - DSR-
1.5-S-70
TROUBLESHOOTING
Problem Possible Cause Possible Solution
Light on, but motor does
not work
The blades are blocked. Check the blades.
The capacitor is damaged. Replace the capacitor.
The motor is damaged. Replace the motor.
The internal wiring of
the motor is cut off/
disconnected. An
unpleasant smell may be
produced.
Replace the motor.
Both light and motor do
not work
Apart from the above mentioned, check the following:
The light is damaged. Replace the light module.
The power cord is loose. Connect the wires
according to the electric
diagram.
Oil leaks. The air outlet and the air
ventilation entrance are
not tightly sealed.
Take down the outlet and
seal it with glue.
Loading ...
Loading ...
Loading ...