Loading ...
Loading ...
Loading ...
WAG0123X
KR15DDT engine
WARNING
Always follow the instructions below.
Failure to do so could result in
damage to the charging system and
cause personal injury.
1. If the booster battery is in another
vehicle
, position the two vehicles (
and ) to bring their batteries into
close proximity to each other.
Do not allow the two vehicles to
touch.
2. Apply the parking brake.
3. Push the park button to engage the P
(Park) position.
4. Switch off all unnecessary electrical
systems (headlights, heater, air condi-
tioner, etc.).
5. Connect jumper cables in the se-
quence as illustrated (
? ? ?
).
CAUTION
. Always connect positive (+) to
positive (+) and negative (−) to
body ground (for example, as
illustrated), not to the battery.
. Make sure the jumper cables do
not touch moving parts in the
engine compartment and that
the cable clamps do not contact
any other metal.
6. Start the engine of the booster vehicle
and let it run for a few minutes.
7. Keep the engine speed of the booster
vehicle
at about 2,000 rpm, and
start the engine of the vehicle
being
jump started.
In case of emergency 6-13
Loading ...
Loading ...
Loading ...