Loading ...
Loading ...
Loading ...
English
77
Problem (Recording) Solution
Troubleshooting (continued)
The message ‘Insert
recordable disc’ appears.
The message ‘Collision’
appears.
Recordings are not
occurring as scheduled.
New recordings cannot
be made.
The index screen ickers
when a DVD±R is
inserted.
The wrong TV channel was
decoded (recorded) after
you programmed a
recording using the
SHOWVIEW
®
/VIDEO Plus+
®
system.
– Either no disc was inserted or the disc that was inserted
cannot be used for recordings. Insert a recordable DVD
(DVD±R, DVD±RW, or DVD+R Double Layer).
– The timer recording overlaps with another timer
recording.
– If you ignore this warning, the programmed recording
with the earlier start time will start rst.
– Change the information for one of the two recordings.
– Delete one of the two recordings
– Ensure that the recorder’s time and date are set
correctly. Read chapter “System Menu Options - Setup
settings – { Clock }” for details.
– Two timer programmes may have overlapped, in which
case only the earlier one will record completely.
– You cannot use the recorder to duplicate copyright
material (DVDs or videotapes) onto a recordable DVD,
“COPY PROT” will be displayed.
– You can nalise the disc using the following function:
1) Press OPEN/CLOSE on this recorder to open the disc
tray.
2) Insert the disc but do not close the tray.
3) Hold down button number { 4 } on the remote control
until the tray closes. “FINALIZING” appears on the
display panel.
4) If nalising has been successful, the Picture Index
screen will appear.
1) Enter the S
HOWVIEW® programming number/ Plus
Code of the desired TV channel.
2) Press OK to con rm.
3) Check the channel number in the {Program #} input
eld. If this does not correspond to the desired TV
channel, select this entry eld and change the channel
number.
4) Press OK to con rm.
dvdr5500-05n31_eng_25722.indd 77dvdr5500-05n31_eng_25722.indd 77 2007-05-30 10:04:05 AM2007-05-30 10:04:05 AM
Loading ...
Loading ...
Loading ...