Loading ...
Loading ...
Loading ...
English
61
System Menu Options (continued)
Video output settings (underlined options are the factory default settings)
TV shape
The picture shape can be adjusted to t your TV.
{ 16:9 Widescreen } – For wide-screen TV (frame
ratio 16:9).
{ 4:3 Panscan } – For a full-height picture with the
sides trimmed.
{ 4:3 Letterbox } – For a ‘wide-screen’ display with
black bars on the top and bottom.
Active video output
Select the type of video output that matches the video connection
between this recorder and your TV.
{ SCART (RGB) } – For SCART connection.
{ Comp. Video (YUV) } – For component video connection.
To enable progressive scan feature, go to
{ Video format } setting.
{ HDMI output } – For HDMI video connection.
Note: Video output setting is not required for S-Video or Composite
(CVBS) video connection.
Video format
This feature is only applicable for component video connection.
You can choose between progressive and interlaced video format,
check your TV for compatibility.
{ Interlaced } – For TV that is not compatible with
progressive-scan video.
{ Progressive } – Select this if your TV is progressive-scan
compatible.
.
Note: If you choose a setting that is incompatible with your TV, you
may not be able to see any picture at all. In this case,
wait for 15
seconds for auto recovery or turn off the progressive scan as below:
1) Disconnect the recorder’s ~MAINS from the power supply.
2) Hold down . on the front panel whilst reconnecting its ~MAINS
to the power supply.
Black level
Adapt the colour dynamic for NTSC disc.
{ Normal } – Normal colour contrast.
{ Enhanced } – Improve the colour contrast and brightens
the picture of an NTSC-compatible DVD.
dvdr5500-05n31_eng_25722.indd 61dvdr5500-05n31_eng_25722.indd 61 2007-05-30 10:04:03 AM2007-05-30 10:04:03 AM
Loading ...
Loading ...
Loading ...