Loading ...
Loading ...
Loading ...
OPERATIONS & CONTROLS
8
1 On/OBuon
2 Fahrenheit&Celsius
3 UpandDownArrows
3 UpandDownArrows
1 Fahrenheit&Celsius
2 On/OBuon
CONTROL
PANEL
CONTROL
PANEL
9
OPERATIONS & CONTROLS
POWER
● Once the heater is plugged into the outlet it will be in standby mode.
● The On/Off button needs to be pressed in order to turn on the heater and operate the
remote control.
● The power is automacally adjusted by the built-in program and works as follows
1. If the room temperature is 1 °F or 1 °C higher than the preset temperature, it
switches o all heang power, but the On/O light will remain on(red) and the leaf
light be o.
2. If the room temperature is 1 °F or 1 °C lower than the preset temperature, it will
turn on all heang elements (full power), the On/O light will be red, and the leaf
light is On(red).
3. If the room temperature is between upper temp and lower temp, it switches on only
one group of heang elements (half power), the On/O light will be red, and the leaf
light is On(green)
For instance:
Preset temperature: 72 °F
If room temperature is 74 °F, no heang (no power)
If room temperature is 71 °F, or 72 °F, or 73 °F, half heang power (green leaf)
If room temperature is lower than 71 °F (70 °F, 69 °F....) , full power (red leaf)
SELECTING CELSIUS AND FAHRENHEIT
● By pressing the “UP” and “DOWN” buttons at the same time for 3 seconds you can set
the heater to function and display in Celsius or Fahrenheit.
NOTE: Switching between Celsius and Fahrenheit can only be performed using the
Control Panel on the heater and is not available using the remote control.
MODEL# :
HS-1000-WX
HS-1000-WA
MODEL# : HS-1500-PHX
Loading ...
Loading ...
Loading ...