Loading ...
Loading ...
Loading ...
Electrical connection
41
Danger of injury!
Installation, maintenance and repairs
by unqualified persons could be
dangerous. Miele cannot be held
liable for unauthorised work.
All electrical work must be
undertaken by a suitably qualified
and competent person in strict
accordance with current national and
local safety and building code
regulations.
Connection of this appliance must
comply with national and local safety
regulations.
A suitable means of disconnection must
be provided on site for each pole.
Suitable means of disconnection
include switches with an all-pole
contact gap of at least 3mm. These
include isolator switches, fuses and
relays.
A means of disconnection must be
incorporated in the fixed wiring in
accordance with the wiring rules.
For extra safety, it is advisable to
protect the appliance with a suitable
residual current device (RCD) with a trip
current of 30 mA.
Connection data
The connection data is quoted on the
data plate. The data plate of the Upright
Cooker is located behind the removable
plinth cover (see “Overview Upright
Cooker”).
Please ensure the connection data
matches the household supply.
When replacing or changing the
mains connection cable, ensure that
the correct cable type is used.
For a 3 phase connection use cable
type H05 VV-F.
For a 1 phase connection use cable
type S05 VV-F.
NEW ZEALAND
If this Upright Cooker is to be
connected to a new or upgraded
electrical installation, it must be
connected to the mains electricity
supply by a supply cord fitted with:
– an appropriately rated plug that is
compatible with the socket fitted to
the final sub-circuit in the fixed wiring
that supplies this cooking range; or
– an appropriately rated installation
male connector that is compatible
with the installation female connector
fitted to the final sub-circuit in the
fixed wiring that supplies this
appliance.
Loading ...
Loading ...
Loading ...