Loading ...
Loading ...
Loading ...
Anti-tip device
38
Do not push the Upright Cooker
into position until all supply
connections have been
established.
The plinth cover is attached to the
base of the Upright Cooker by
magnets.
a
Plinth cover
b
Locking latch
Remove the plinth cover from the
Upright Cooker.
Pull out the locking latch .
The locking latch fits into the base
plate of the Upright Cooker. It can be
pulled out and pushed back in again.
Its length is approximately equal to the
depth of the Upright Cooker.
A slot is located in the non-visible rear
section of the locking latch. This slot
engages with the bolt of the anti-tip
device when you slide the locking
latch back in.
Complete all necessary connections
for the Upright Cooker. Read the
information in the “Electrical
connection” and “Gas connection”
sections.
The Upright Cooker can be damaged
if it is lifted by the control panel, the
island trim or the door handle.
Open the oven door and hold the
appliance by the front of the oven
cavity.
Lift the front of the Upright Cooker
and move it with the help of the rear
wheels.
Slide the Upright Cooker into
position, guiding the middle of the
appliance onto the anti-tip device.
Slide the appliance all the way back
to the wall.
Loading ...
Loading ...
Loading ...