Loading ...
Loading ...
Loading ...
Features
16
Optional accessories
All accessories listed in these
instructions are designed to be used
with the Miele Upright Cooker.
These are available to order via the
Miele online shop or directly from Miele
(see the end of this booklet for contact
details).
When ordering, please quote the model
number of your Upright Cooker and the
reference number of the accessories
required.
RBGDF wall panel for Dual Fuel
Upright Cooker
Depending on the model, you can
exchange the existing edge profile on
your appliance for a taller wall panel.
The wall panel is available in the
following heights: 305 mm and 508 mm.
If installing the Upright Cooker against a
wall made of flammable materials, a
wall panel that is at least 305mm high
must be fitted. If you do not wish to
replace the existing edge profile, the
Upright Cooker must be installed with a
gap of at least 305mm between it and
the wall made of flammable materials.
Fitting the RBGDF wall panel
The back of the Upright Cooker must
be accessible.
Fit the wall panel before installing the
anti-tip device and connecting the
Upright Cooker.
Loosen the screws of the edge
profile.
Pull back the edge profile slightly until
it can be removed.
Refit the wall panel in the reverse order.
RBS backsplash panel
The backsplash panel is designed for
installation with a Miele rangehood.
Please observe the installation
instructions supplied with the
rangehood.
Loading ...
Loading ...
Loading ...