Loading ...
Loading ...
Loading ...
43
Snap Angle Filter: Use this slider to increase or decrease the efficiency of the side of a face to be
detected. The sensitivity for this option will be set to the highest level (90), however, can be adjusted
between 1~90.
Snapshot Sensitivity: Use this slider to increase or decrease the sensitivity of the camera to detect and
send a facial snapshot. Please note, the higher the sensitivity is, the more snapshots will be triggered. The
default snapshot sensitivity will be set to 80, however, it can be adjusted between 0~100.
Quality Threshold: Click on the checkbox to set a quality threshold for the snapshot. Once enabled, use
this slider to increase or decrease the threshold quality of the snapshot. The default threshold will be set
to 70, however, it can be adjusted between 1~100.
Duration Optimal: This option allows the user to set, in seconds, the optimal time in which a snapshot will
be sent. The default duration is set to 10 seconds, however, can be adjusted between 1~300 seconds.
Detect Region: This option is used to set a face detection area. The area will be full screen by default.
Clear: This option is used to clear any face detection areas currently set.
Exclude Region: This option is used to set an area in which the face detection rule will not apply.
Clear: This option is used to clear any excluded face detection areas.
Target Filter: This option allows the user to set a maximum and minimum size of the target area. By default, this
option will be set to the max resolution, however, it can be manually adjusted.
Draw Target: Allows the user to set a target area on the live monitor screen.
Clear: Clears the modified target area to draw the target area on the live monitoring screen.
Pixel Counter: Used to measure and set the number of pixels in the target area on the live monitoring screen.
To reset to default settings, click the Reset Defaults button. To refresh the page, click the Refresh button. To save
the settings, click the Save button.
Using Face Detection
Face detection is a tool used to detect
1. Click Enable to enable face detection.
2. Click Setup to set a schedule, set your periods (if any) and click Save to continue.
Note: If needed, click on the Enable Face Enhancement checkbox to enhance the accuracy of the face detection
image.
3. Enable the Record checkbox to record the event.
4. Check the Send Email and Snapshot checkboxes if you would like a snapshot of the event emailed to you. A valid
Email address must be established in the device prior to enabling this setting. For more information on setting up
email alerts, please visit amcrest.com/support.
Note: If needed, click on the Enable Face Exposure checkbox to automatically increase, or decrease the
exposure of the image once a face is detected.
5. This is not necessary however, to exclude a specific area on the interface from being able to detect faces, click
on the Exclude Region button then draw the excluded area on the interface. Click Save to save the settings to your
camera.
IVS
IVS stands for stands for intelligent video system analytics and is the basis for all the AI rules associated with your
camera. The IVS menu allows the user to customize and set IVS rules which allows the camera to produce general
behavior analytics and reporting directly from the web user interface.
Below is a screenshot of the IVS menu:
Loading ...
Loading ...
Loading ...