Dji MINI 2 FlyCam

User Manual - Page 29

For MINI 2.

PDF File Manual, 51 pages, Read Online | Download pdf file

Loading ...
Loading ...
Loading ...
28
©
2021 DJI All Rights Reserved.
Remote Controller
Remote Controller Profile
DJIMini2comesequippedwiththeDJIRC-N1remotecontroller,whichboastsDJI’slong-rangeOcuSync
2.0transmissiontechnology,offeringamaximumtransmissionrangeof6mi(10km)and720pwhen
displayingvideofromtheaircrafttoDJIFlyonyourmobiledevice.Easilycontroltheaircraftandcamera
usingtheonboardbuttons.Thedetachablecontrolsticksmaketheremotecontrollereasiertostore.
Inawide-openareawithnoelectromagneticinterference,OcuSync2.0smoothlytransmitsvideolinks
atupto720p.Theremotecontrollerworksatboth2.4GHzand5.8GHz,andwillautomaticallyselect
thebesttransmissionchannel.
OcuSync2.0reduceslatencytoapprox.200ms by improvingthecameraperformancethroughthe
videodecodingalgorithmandthewirelesslink.
Thebuilt-inbatteryhasacapacityof5200mAhandamaximumruntimeof6hours.Theremote
controllerchargesthemobiledevicewithachargingabilityof500mA@5V.Theremotecontroller
automaticallychargesAndroiddevices.ForiOSdevices,firstmakesurethatchargingisenabledin
DJIFly.ChargingforiOSdevicesisdisabledbydefaultandneedstobeenabledeachtimetheremote
controllerispoweredon.
ComplianceVersion:Theremotecontrolleriscompliantwithlocalregulations.
ControlStickMode:Thecontrolstickmodedeterminesthefunctionofeachcontrolstickmovement.
Threepre-programmedmodes(Mode1,Mode2,andMode3)areavailableandcustommodescan
beconguredinDJIFly.ThedefaultmodeisMode2.
Using the Remote Controller
Powering On/O
Pressthepowerbuttononcetocheckthecurrentbatterylevel.Ifthebatterylevelistoolow,recharge
beforeuse.
Pressonce,thenpressagainandholdtopowertheremotecontrolleronoro.
Charging the Battery
UseaUSB-CcabletoconnecttheUSBchargertotheUSB-Cportoftheremotecontroller.Ittakes
approx.fourhourstofullychargetheremotecontroller.
Controlling the Gimbal and Camera
1. Shutter/RecordButton:pressoncetotakeaphotoortostartorstoprecording.
2. Photo/VideoToggle:pressoncetoswitchbetweenphotoandvideomode.
Loading ...
Loading ...
Loading ...