Loading ...
Loading ...
Loading ...
VIZIO
®
VO47L FHDTV30A User Manual
Version 11/20/2008 73
www.VIZIO.com
Searching for Component Codes
If you cannot find the manufacturer in the component list or the program code does not work, you can use
the remote control to search for the correct component code.
To search for a component code:
1. Turn on the component.
2. Press the matching component button on the remote control.
3. Press and hold the SET button until the LED flashes twice. If the LED flashes 5 times replace
the batteries.
4. Press 9 1. The LED flashes twice.
5. If the component is a cable or satellite set top box press 0, if it is a DVD player press 2, if it is
an audio receiver or amplifier press 3.
6. Point the remote control at the component and then alternate between pressing the POWER
button and the CH+ button on the remote control until the component turns off. When it turns
off press the SET button to save the current code. The LED will flash twice.
Using a Cable or Satellite Remote
To use a cable or satellite remote to work the LCD HDTV, refer to your cable or satellite remote user
guide for more information on how to program the remote. If your cable or satellite remote uses a 5-digit
code (like most Direct TV units), first try 11758 and then, if that does not work, try 01377 and 10178. If
your cable or satellite remote uses a 4-digit code, try 1758 and then 0178 as an alternative. If your cable
or satellite remote uses a 3-digit code (Echostar or Dish Network for example), use code 627.
Note: Some buttons may not function as expected on your cable or satellite remote. Typically power,
volume and mute will work.
Loading ...
Loading ...
Loading ...