Loading ...
Loading ...
Loading ...
Continued on Next Page
SB-GM-CAMCONV/10W1v2 INSTR_SKU# 011327
Page 4 • JL Audio, Inc., 2011
STEP 23
Align a straight edge with the lower edges of the
indentations in the rear trunk liner. Using a grease pencil,
draw a line across the panel, as shown.
STEP 22
Replace the passenger side trunk liner. Place a 3/8” - 16 x
1-1/2” Bolt through a 3/8” Split Lock Washer, 3/8” Flat Washer,
Bracket, 3/4” Spacer, and the hole in the trunk liner, as shown,
thread it into the U-Nut, and firmly tighten.
STEP 26
Reinstall the floor panels.
STEP 21
Replace the driver’s side trunk liner. Place a 3/8” - 16 x 1-1/2”
Bolt through a 3/8” Split Lock Washer, 3/8” Flat Washer,
Bracket, 3/4” Spacer, and the hole in the trunk liner, as shown,
thread it into the U-Nut, and firmly tighten.
STEP 25
Reinstall the upper portion of the rear trunk liner, as shown,
then reinstall the cargo cover.
STEP 20
Insert a U-Nut through the larger hole, and align with the
center hole, as shown.
STEP 24
Cut along the line with a razor knife.
STEP 27
Place one of the enclosures in the trunk.
Loading ...
Loading ...