Loading ...
Loading ...
Continued on Next Page
SB-GM-CAMCONV/10W1v2 INSTR_SKU# 011327
Page 3 • JL Audio, Inc., 2011
STEP 15
Remove the clips that hold each side trunk liner in place, and
remove the trunk liner.
STEP 14
Pictured is the trunk with the rear trunk liner removed.
STEP 18
Locate the lower hole on the passenger side bracket, and
enlarge the hole to 1”.
STEP 13
Remove the two bolts holding in the cargo cover, and
remove the cover. Remove the rear trunk liner.
STEP 17
Align the U-Nut with the enlarged hole, as shown.
STEP 12
Close the convertible top, and open the trunk. Remove the
trunk floor panels. Remove the tie down hooks on the trunk
sill panel, and unclip and remove the panel.
STEP 16
Locate the lower hole on the driver’s side bracket, and
enlarge the hole to 1/2”.
STEP 19
Enlarge the center hole to 1/2”.
Loading ...
Loading ...
Loading ...