Kodak EasyShare CX4230 Cameras

User Manual - Page 69

For EasyShare CX4230.

PDF File Manual, 108 pages, Read Online | Download pdf file

Loading ...
Loading ...
Loading ...
61
Chapter 9
Stored pictures are
damaged.
The card was removed
when the ready light was
blinking.
Make sure the ready light is
not blinking before
removing the card.
Pictures remaining
number does not
decrease after
taking a picture.
Picture does not take up
sufficient space to
decrease the picture
remaining number.
The camera is operating
normally. Continue taking
pictures.
Picture is not clear. The lens is dirty. Clean the lens (page 82).
Subject too close when
taking picture.
Move so there is at least 1.6
ft (0.5 m) between the
camera and the subject; or
turn on Close-up (page 19).
Camera may be in Close-
up (page 19) and the
subject is too far away
for proper focus.
Turn off Close-up (page 19).
Subject or the camera
moved while the picture
was taken.
Hold the camera steady
while taking the picture.
The subject is too far
away for the flash to be
effective.
Move so there is no more
than the following distance
between the camera and the
subject: 12.8 ft (3.9 m) in
Wide angle; 7.5 ft (2.3 m) in
Telephoto.
Camera
Problem Cause Solution
Loading ...
Loading ...
Loading ...