Loading ...
Loading ...
Loading ...
60
Chapter 9
Picture is too dark. Flash is not on or did not
function.
Turn on the flash (page 16).
The subject is too far
away for the flash to have
an effect.
Move so there is no more
than the following distance
between the camera and the
subject: 12.8 ft (3.9 m) in
Wide angle; 7.5 ft (2.3 m) in
Telephoto.
The subject is in front of
a bright light (backlit).
Use Fill flash (page 16) or
change your position so the
light is not behind the
subject.
Lighting condition is too
dark.
Increase exposure
compensation (page 21).
Camera freezes up
when a card is
inserted or
removed.
Camera detects an error
when the card was
inserted or removed.
Turn the camera off, then
back on. Make sure the
camera is turned off before
inserting or removing a
card.
Picture is too light. The flash is not needed. Change to Auto flash
(page 16).
The subject was too
close when the flash was
used.
Move so there is at least 1.6
ft (0.5 m) between the
camera and the subject.
Lighting condition is too
bright.
Decrease exposure
compensation (page 21).
Camera
Problem Cause Solution
Loading ...
Loading ...
Loading ...