Loading ...
Loading ...
Loading ...
51
Chapter 8
Connecting the Camera Dock
After the KODAK EASYSHARE Software is loaded (see page 45), connect the
Camera Dock to your computer and to an external power source. You will
need:
m the USB cable included with your camera
m the AC adapter, 7-Volt included with the Camera Dock
IMPORTANT: Make sure your camera is NOT in the Camera Dock
when you are connecting to power and the computer.
1 Plug the labeled ( ) end of the USB cable
into the labeled USB port on your computer.
See your computer User’s Guide for details.
2 Plug the other end of the USB cable into the
square USB connector on the back of the
Camera Dock.
3 Plug the AC adapter into the round power
connector on the back of the Camera Dock
and into a power outlet.
Your AC adapter may be different from
the one pictured or may have additional
plugs. Use the plug that accommodates
your type of power outlet.
Leave the Camera Dock connected to the computer for easy access for
transferring pictures and charging the Battery Pack.
IMPORTANT: Use only the AC adapter, 7-Volt included with the
Camera Dock. Other adapters may cause damage to
your camera, Camera Dock, or computer.
1
2
3
DC
I
N
3V
Loading ...
Loading ...
Loading ...