Loading ...
Loading ...
Loading ...
GB - 21
12
461308194 05/2014
HOW TO CLEAN THE INNER OVEN DOOR GLASS
One of the features of our cookers is that the inner
oven door glass can be easily removed for cleaning
without the aid of specialized personnel. Just open the
oven door and remove the support securing the glass
(g. 13).
ATTENTION!! This operation can be done also
with the door tted on appliance, but in this
way, pay attention that when the glass is pull
upwards, the force of the hinges can close the
door roughly.
INSTRUCTIONS FOR THE USER
Some of the problems occur because of simple maintenance oversights or operation mistakes and can easily be
resolved without having to call for technical assistance.
PROBLEM REMEDY
The appliance is not working
• Make sure the gas cock is open
• Check the plug is in
• Check that the knobs are set correctly for cooking and then repeat the
operations given in the handbook
• Check the electrical system safety switches (RCD). If there is failure in
the system call an electrician in.
During use of the ceramic glass
hob, the residual heat warning light
does not switch on
• Turn the knob round to a hotter temperature
• Turn the knob of another element
• Call our Assistance Centre
The electric oven is not working • Check that the programmer accessory, if there is one, is on the manual
position and then repeat the operations described in the manual
The thermostat is not working
• Call our Service Centre
The electric thermostat warning
light does not switch on during use
• Turn the thermostat round to a hotter temperature
• Turn the selector round to a different function
The oven light does not switch on • Make sure the lamp is rmly screwed in place
• Buy a lamp for high temperatures at one of our Service Centre and t
it following the REPLACING THE OVEN LAMP paragraph.
Warning: Servicing should be carried out only by authorised personnel.
TROUBLESHOOTING
13
OVEN DOOR REMOVAL
(g. 12)
The oven door can be removed to give easier access
to the oven when cleaning.
To remove, proceed as follows:
• Open the oven door and insert rivet or nail (R) in the
hole (F) of the hinge.•
Partially close the door, forcing it upwards at the
same time to free stop tooth and hinge sector.
• Once the hinge is free, pull the door forwards tilting
it slightly upwards to free sector.
• To reassemble proceed in the reverse order, paying
attention to the correct position of sectors.
Loading ...
Loading ...
Loading ...