Loading ...
Loading ...
Loading ...
uuLocking and Unlocking the DoorsuLocking/Unlocking the Doors from the Outside
134
Controls
To temporarily deactivate the function:
1. Set the power mode to OFF.
2. Open the driver’s door.
3. Using the master door lock switch, operate
the lock as follows:
Lock Unlock Lock Unlock.
u The beeper sounds and the function is
deactivated.
To restore the function:
• Set the power mode to ON.
• Lock the vehicle without using the auto lock
function.
• With the keyless remote on you, move out
of the auto lock function operation range.
• Open any door.
1Locking the doors and trunk (Walk away auto lock®)
The auto lock function does not operate when any of
the following conditions are met.
• The keyless access remote is inside the vehicle.
• A door or the hood is not closed.
• The power mode is set to any mode other than
OFF.
• The keyless access remote is not located within a
radius of about 5 feet (1.5 m) from the vehicle
when you get out of the vehicle and close the
doors.
Auto lock function operation stop beeper
After the auto lock function has been activated, the
auto lock operation stop beeper sounds for
approximately two seconds in the following cases.
• The keyless access remote is put inside the vehicle
through a window.
• You are located too close to the vehicle.
• The keyless access remote is put inside the trunk.
If the warning beeper sounds, check that you are
carrying the keyless access remote. Then, open/close
a door and confirm the auto lock activation beeper
sounds once.
In the case that the keyless remote is out of operating
range when you close a door or the trunk, a beeper
will sound to indicate that the auto lock function has
been canceled.
20 ACURA RLX HYBRID-31TY36601.book 134 ページ ２０１９年７月２３日 火曜日 午後６時２５分
Loading ...
Loading ...
Loading ...