Loading ...
Loading ...
Loading ...
en Time-setting options
22
The cooking time has elapsed
An audible signal sounds. The appliance stops heating.
The cooking time is shown as zero in the display.
Once the signal stops, you can touch the
@ button to
set a new cooking time.
Once the food is ready, switch off the appliance by
turning the selector for the electric grill to the off
position and pressing the multifunctional button.
Changing and cancelling
You can use the A or @ button to change the end time.
After a few seconds, the change will be applied. The
end time cannot be changed once the cooking time has
already started to count down. Otherwise the cooking
result would no longer be satisfactory.
To cancel, use the A button to set the end time all the
way back to the current time plus the cooking time. The
appliance will start to heat and the cooking time will
start to count down.
Setting the timer
You can use the timer whether or not the appliance
itself is in use. However, it is not possible to set a
cooking time or end time.
The maximum time that can be set is 23 hours and 59
minutes. Up to 10 minutes, the timer duration can be
set in 30-second increments. Above 10 minutes, the
time increments become longer the higher the value.
The timer duration will start at a different default value,
depending on which button you touch first:
5 minutes if you touch the A button and 10 minutes if
you touch the @ button.
1. Touch the v button until the timer symbol Q is
highlighted.
2. Use the A or @ button to set the timer duration.
After a few seconds, the timer duration will start to
count down.
Tip: If the set timer duration is the duration for which
you wish to cook your food, use the cooking time. The
appliance will then switch off automatically when it has
finished cooking.
The timer duration has elapsed
An audible signal will sound. The timer duration will be
zero on the display.
Touch any button to switch off the timer.
Changing and cancelling
You can use the A or @ button to change the timer
duration at any time. After a few seconds, the change
will be applied.
To cancel, use the A button to reset the timer duration
all the way to zero. The timer is now switched off.
Setting the time
When the appliance is connected to the power supply
or following a power failure, the time flashes in the
display. Set the time.
The multifunctional button must be switched off.
1. Touch the v button.
The time stops flashing.
2. Use the A or @ button to set the time.
The appliance applies the settings after a few seconds.
Changing the time
You can change the time again when you need to, e.g.
from summer to winter time.
To do this, touch the v button while the multifunctional
button is switched off until the time flashes. Use the A
or @ button to change the time.
Loading ...
Loading ...
Loading ...