Loading ...
Loading ...
Loading ...
REFRIGERATOR INSTALLATION
14
7
1
2
6
5
3
4
8
9
10
11
1
Fixation
Assembly
Screws
Screws
1
2
Allen
Wrench
3
4
4
2
3
4
2. Installing the Refrigerator Door
Remove the cover (1) using a flat head screwdriver (this requires a little force), loosen the 2 screws (2) and place on the
opposite side.
Place the hinge (3) on the opposite side and install the 4 screws (4 and 5).
Insert the pin (6) in the hinge (3).
Remove the cover (7) and install on the right side.
Place the door and line up with the pin holes (8), making sure that both parts are aligned.
Place the top hinge (9) and insert the 3 screws (10).
Position the cover of the hinge over this (11).
Check that the door has been installed correctly.
NOTE: The appearance of the handle may appear different.
• Loosen the fixation screws (1) with a 3/32 Allen wrench and
remove the handle (2).
•
•
•
Remove the assembly screws (3) with a ¼ Allen wrench.
Carefully remove the plug buttons from the door (4).The
Install the buttons (4) on the left side.
buttons can be unscrewed using your fingers, turning
counter-clockwise. Continue turning until the screw is
HOW TO REMOVE THE DOOR HANDLES
3. Removing the Refrigerator Handle
• Rotate handle upside down (1).
• Insert the assembly screws on the opposite side of the
door (2).
4. Replacing the Refrigerator Handles
Hold the handle in place with the holes lined up with the
screw holes (3) and tighten the screws(4) in place with
•
loose and falls out.
the 3/32 Allen wrench.
Loading ...
Loading ...
Loading ...