Loading ...
Loading ...
Loading ...
11
Cup warmer
This function enables the cup warmer to be enabled or disabled.
Proceed as follows:
1. Press the MENU button to enter the menu;
2. Turn the selection dial until “Cup warmer” is displayed;
3. Press
: “Enable?” or “Disable?” is displayed;
4. Press
to enable or disable the cup warmer (an asterisk
under "Cup Warmer" shows that it is active).
5. Then press the button to exit the menu.
Warming the cups keeps the coee hot.
Energy saving
Use this function to enable or disable Energy saving. When en-
abled, the function reduces energy consumption in compliance
with current European regulations.
When energy saving mode is active, an asterisk appears below
“Energy saving” in the menu.
1. Press the MENU button to enter the menu;
2. Turn the selection dial until “Energy saving” is displayed;
3. Press
: “Enable?” or “Disable?” is displayed;
4. Press
to enable or disable the energy saving mode;
Then press to exit the menu.
When the function is active, if the machine is not used for some
time, “Energy saving” is displayed.
Please note:
• When in energy saving mode, a few seconds elapse before
the rst coee, cappuccino or milk based coee is delivered
as the appliance must heat up again.
• To prepare any drink, press any button to exit energy sav-
ing, then press the button corresponding to the drink you
want to make.
• If the milk container is inserted, “Energy saving” is not acti-
vated.
Setting the temperature
To modify the temperature (low, medium, high) of the water
used to make the coee, proceed as follows:
1. Press the MENU button to enter the menu;
2. Turn the selection dial until “Set temperature” is displayed;
3. Press the
button.
4. Turn the selection dial until the desired temperature
(l=low; llll =high) is shown on the display.
5. Press
to conrm.
The temperature has been reprogrammed: press to exit
the menu.
Setting water hardness
For instructions on setting water hardness, see page 17.
Enable/disable the beep
This enables or disables the beep emitted by the machine each
time an icon is pressed or an accessory is inserted/removed. To
disable or re-enable the beep, proceed as follows:
1. Press the MENU button to enter the menu;
2. Turn the selection dial until “Beep” is displayed;
3. Press
: “Enable?” or “Disable?” is displayed;
4. Press the
button to enable or disable the beep;
5. When the function is enabled an asterisk appears under
"Beep" in the menu.
Then press
to exit the menu.
Setting the language
To modify the language on the display, proceed as follows:
1. Press the MENU button to enter the menu;
2. Turn the selection dial until “Set language” is displayed;
3. Press
;
4. Turn the selection dial until the desired language is dis-
played;
5. Press
to conrm;
6. A message conrming the language installed is displayed;
7. Then press the
button to exit the menu.
Cup lighting
This function enables or disables the cup lighting. When the
function is active, the lighting comes on whenever cappuccino
or milk based drinks are made or the appliance is rinsed.
To disable or re-enable this function, proceed as follows:
1. Press the MENU button to enter the menu;
2. Turn the selection dial until “Cup lighting” is displayed.
3. Press
: “Enable?” or “Disable?” is displayed;
4. Press the
button to enable or disable the cup lighting;
5. When the function is active, an asterisk appears under “Cup
lighting” in the menu.
Then press
to exit the menu.
Default values (reset)
This resets all menu settings and programmed quantities back
to the default values (with the exception of the language which
remains as set).
1. Press the MENU button to enter the menu;
2. Turn the selection dial until “Default values” is displayed;
3. Press
;
4. Conrm?” is displayed.
5. Press
to conrm and exit.
Statistics function
This displays statistics relating to the machine. To display, pro-
ceed as follows:
1. Press the MENU button to enter the menu;
Loading ...
Loading ...
Loading ...