Loading ...
Loading ...
Loading ...
Installation
56
5. Remove the top.
Replacing the nozzles/air regulation
1. Unscrew screw "A" and push air
regulator "B" as far as it will go.
2. Use a spanner to remove the nozzles "C"
and install the new ones for the required
gas supply, following the indications
given in the relevant table (see "Gas
types and Countries").
3. Reposition support "B" so that nozzle "C"
is covered completely.
4. Move the Venturi tube "D" to adjust the
air flow until distance "X" is reached as
indicated in the paragraph (see Table
"Burner and nozzle characteristics" -
"Primary air adjustment (mm)") and then
secure the tube by means of screw "A".
5. After adjusting each burner, reassemble
the appliance correctly.
The nozzle tightening torque must
be no more than 3 Nm.
Loading ...
Loading ...
Loading ...