Loading ...
Loading ...
Loading ...
429548
REMOVING AND REPLACING THE OVEN DOOR WITH A
CAM HINGE
• Completely open the oven door. Lift the clips of the
lower hinge supports on both sides to the upright
position and clip them to the plug of the upper hinge
supports.
• Close the oven door half way and gently pull them out.
Replace the door in the reverse order.
• Insert the door in the half-closed position (angle of
approximately 60°) by pushing them towards the oven
while opening them all the way. Pay attention to the
notches on the lower hinge supports, which should
coincide with the lower edge of the notches on the front
side. When the door is completely opened, remove the
clips from the plugs of the upper hinge supports and
return them to horizontal position.
REMOVING AND REPLACING THE OVEN DOOR WITH A
SINGLE-AXIS HINGE (depending on the model)
a) Conventional closing
b)GentleClose – the system absorbs the shock from door
closing. It allows simple, quiet, and smooth closing. A
gentle push (to a 15° angle relative to the closed door
position) is enough for the door to close automatically
and softly.
If the force applied to close the door is too strong,
the effect of the GentleClose system is reduced or
the system will be bypassed for safety.
• Fully open the oven door and rotate the stoppers all the
way back – applies to conventional door closing (Figure
1).
fi gure 1
33
Loading ...
Loading ...
Loading ...