Loading ...
Loading ...
Loading ...
28
How to Install the Washing Machine
Connecting
to the tap
● Water supply hose
■
The optimum water pressure is 0.03 to 0.8 MPa.
■
Use a horizontal tap.
Horizontal tap
Extension tap
Square tap
Connect the water supply hose to the water supply inlet on the washing
machine.
Check that the rubber seal is in the hose connector.
Rubber seal
Connector
* Water supply hose for screw type tap is optional (Part No.BD-W80MV
151)
Securely fasten the water supply hose to the tap and be sure there is
no water leakage.
Connecting
water supply
hose to the tap
● If the water supply hose installs,
tighten the water supply hose to
water tap.
■
Dismantling
1. Turn off water tap.
2. Press start button and run for 10 seconds.
● This is to prevent water from spilling out
during dismantling.
3. Dismantle the water supply hose.
Water supply hose
Water supply hose
Loading ...
Loading ...
Loading ...