Loading ...
Loading ...
Loading ...
12
ASSEMBLING AND PREPARING
ENGLISH
Mounting on a wall
For proper ventilation, allow a clearance of 100 mm
(3.94 inches) on each side and from the wall. Detailed
instructions are available from your dealer, see the
optional Tilt Wall Mounting Bracket Installation and
Setup Guide.
If you intend to mount the Monitor set to a wall, attach
Wall mounting interface (optional parts) to the back of
the set.
When you install the Monitor set using a wall mounting
interface (optional parts), attach it carefully so it will not
drop.
1
Please, Use the screw and wall mount interface in
accordance with VESA Standards.
2
If you use screw longer than standard, the monitor
might be damaged internally.
3
If you use improper screw, the product might be
damaged and drop from mounted position. In this
case, LG Electronics is not responsible for it.
4
VESA compatible only with respect to screw
mounting interface dimensions and mounting screw
specifications.
5
Please use VESA standard as below.
y
784.8 mm (30.9 inch) and under
* Wall Mount Pad Thickness : 2.6 mm
* Screw :
Φ
4.0 mm x Pitch 0.7 mm x
Length 10 mm
y
787.4 mm (31.0 inch) and above
* Please use VESA standard wall mount pad and
screws.
y
Use the screws that are listed on the VESA
standard screw specifications.
y
The wall mount kit will include an installation
manual and necessary parts.
y
The wall mount bracket is optional. You can
obtain additional accessories from your local
dealer.
y
The length of screws may differ depending on
the wall mount. Be sure to use the proper length.
y
For more information, refer to the instructions
supplied with the wall mount.
NOTE
Model
24MB34PY 24MB34D
VESA (A x B)
100 x 100
Standard screw
M4
Number of screws
4
Wall Mount Plate
(Optional)
RW120
y
Disconnect the power cord first, and then move
or install the Monitor set. Otherwise electric
shock may occur.
y
If you install the Monitor set on a ceiling or
slanted wall, it may fall and result in severe
injury.
y
Use only an authorized LG wall mount and
contact the local dealer or qualified personnel.
y
Do not over tighten the screws as this may
cause damage to the Monitor set and void your
warranty.
y
Use only screws and wall mounts that meet
the VESA standard. Any damages or injuries by
misuse or using an improper accessory are not
covered by the warranty.
y
Screw length from outer surface of back cover
should be under 0.31 inches .
CAUTION
Back Cover
Wall mount Pad
Wall mount Pad
Back Cover
Standard screw
Max.0.31 inches
100 mm
(3.94 inches)
100 mm
(3.94 inches)
100 mm
(3.94 inches)
100 mm
(3.94 inches)
Loading ...
Loading ...
Loading ...