Loading ...
Loading ...
Loading ...
10
ASSEMBLING AND PREPARING
ENGLISH
Using the Kensington locking device
The connector for the Kensington lock is located on the
rear of the monitor.
For more information on installation and usage, refer to
the Kensington lock user manual or visit the website at
http://www.kensington.com.
Connect the monitor to the table with the Kensington
lock cable.
y
Using the Kensington lock is optional. The acces-
sories can be purchased at your local electronics
store.
NOTE
y
Once the pin is removed, it is not necessary to re-
insert it to adjust the height.
3
The height can be adjusted up to 4.72 inches.
y
Do not put your finger between
the screen and the base (chas-
sis) when adjusting the screen's
height.
CAUTION
WARNING
4.72 inches
Adjusting the stand height
1
Place the monitor mounted on the stand base in an
upright position.
2
Remove the tape attached at the bottom rear of
the stand body, then pull out the locking pin.
Tape
Locking Pin
Stand Body
24MB34PY
24MB34PY
24MB34D
Loading ...
Loading ...
Loading ...