Loading ...
Loading ...
Loading ...
31
4 Permanent settings in programming mode
T Press the Rotary Switch to enter the program item.
‘Factory setting’ / ‘Reset the machine to the factory
settings?’
T Press the ‘Yes’ button.
‘Saved’ appears briefly on the display.
Your J6 is switched off.
In this program item you can set the language used by your J6.
Example:Proceed as follows to change the language from
‘English’
to
‘Deutsch’.
T Press the P button.
‘Maintenance status’
T Turn the Rotary Switch until ‘Machine settings’ is displayed.
T Press the Rotary Switch.
‘Choose language’
T Press the Rotary Switch to enter the program item.
‘Choose language’
T Turn the Rotary Switch until ‘Deutsch’ is displayed
T Press the
‘Save’ button.
‘Gespeichert’ appears briefly on the display.
‘Sprachauswahl’
T Press the P button to exit programming mode.
‘Bitte wählen’
In the program item ‘Machine settings’ you can view the
following information:
U
‘Product counter’: Number of prepared specialty coffees, milk
and hot water
U
‘Maintenance counter’: Number of maintenance programs
performed (cleaning, descaling etc.)
U
‘Version’: Software version
Example:Proceed as follows to view the number of specialty coffees
prepared.
T Press the P button.
‘Maintenance status’
T Turn the Rotary Switch until ‘Machine settings’ is displayed.
Language
Querying information
Loading ...
Loading ...
Loading ...