Loading ...
Loading ...
Loading ...
30
4 Permanent settings in programming mode
T Turn the Rotary Switch until ‘Display’ is displayed.
T Press the Rotary Switch to enter the program item.
‘Display’
T Turn the Rotary Switch to change the setting.
T Press the
‘Save’ button.
‘Saved’ appears briefly on the display.
‘Display’
T Press the P button to exit programming mode.
In the program item
‘Machine settings’/ ‘Units’ you can select the
unit used for the amount of water.
Example:Proceed as follows to change the unit for the amount of
water from
‘oz’ to ‘ml’.
T Press the P button.
‘Maintenance status’
T Turn the Rotary Switch until ‘Machine settings’ is displayed.
T Press the Rotary Switch.
‘Choose language’
T Turn the Rotary Switch until ‘Units’ is displayed.
T Press the Rotary Switch to enter the program item.
‘Units’
T Turn the Rotary Switch until ‘ml’ is displayed.
T Press the
‘Save’ button.
‘Saved’ appears briefly on the display.
‘Units’
T Press the P button to exit programming mode.
In the program item
‘Machine settings’ / ‘Factory setting’ the
machine can be reset to its factory setting: All user settings (apart
from the ‘filter’ and ‘water hardness’) are reset to factory settings.
Your J6 then switches off.
T Press the P button.
‘Maintenance status’
T Turn the Rotary Switch until ‘Machine settings’ is displayed.
T Press the Rotary Switch.
‘Choose language’
T Turn the Rotary Switch until ‘Factory setting’ is displayed.
Unit for amount of water
Restore factory settings
Loading ...
Loading ...
Loading ...