Loading ...
Loading ...
Loading ...
Building in the appliance
81
Now push the appliance into the
niche until all fixing brackets at the
top and bottom are touching the front
edge of the cabinet side wall.
This ensures a distance of
15/8" (42mm) to the front edges of
the cabinet side walls all the way
round.
– 5/8" (16mm) thick walls:
The spacers should touch the front
edge of the cabinet side walls at the
top and bottom.
– 3/4" (19mm) thick walls:
The front edges of the top and bot-
tom hinges should be flush with the
front edge of the cabinet side wall.
Important for cabinetry with door
fittings (e.g., knobs, raised seals,
etc.):
The dimensions of these must be
taken into account to ensure there is a
gap of15/8"(42mm) all the way
round.
Pull the appliance forward by the ap-
propriate dimension.
Check again to make sure there is a
gap of 15/8"(42mm) to the front
edges of the door fittings all the way
round.
Tip: If possible, remove the door fittings
and push the appliance into the niche
until all fixing brackets at the top and
bottom are touching the front edge of
the cabinet unit side wall.
Align the appliance on both sides via
the adjustable feet using the wrench
supplied, so that it stands upright.
Loading ...
Loading ...
Loading ...