Loading ...
Loading ...
Loading ...
Installation
65
Side-by-side
The KS 37472 iD appliance has two
foamed-in side-wall heaters, enabling it
to be installed side-by-side with all
other appliances. Each appliance must
be installed in its own housing unit.
Please contact your dealer for specific
information about which combinations
will work with your appliance.
WARNING! This appliance must
be built in, otherwise it could tip
over!
Install the appliance in accordance
with the installation instructions.
Fire hazard and risk of damage!
The appliance must not be installed
underneath a cooktop.
Installation location
This appliance should be installed in a
dry, well-ventilated room.
When deciding where to install your ap-
pliance, please bear in mind that the
energy consumption will increase if in-
stalled near to a heater, a cooker, or
other appliance that gives off heat. Di-
rect sunlight should also be avoided.
The higher the room temperature, the
longer the compressor has to run and
the higher the energy consumption is.
When installing the appliance, please
note:
– The electrical socket must be easily
accessible in an emergency and not
concealed behind the appliance.
– The plug and power cord must not
touch the back of the appliance as
they could be damaged by vibrations
from the appliance.
– Do not plug other appliances into
electrical sockets behind this appli-
ance.
Risk of damage!
In environments with high humid-
ity, condensation may appear on the
external surfaces of the appliance.
This condensate can cause corrosion
on external appliance panels.
To prevent this, it is advisable to in-
stall the appliance with sufficient
ventilation in a dry and/or air-condi-
tioned room.
After installation, please make sure
that the appliance door closes prop-
erly, that the specified ventilation
gaps are adhered to, and that the
appliance is installed in accordance
with these installation instructions.
Loading ...
Loading ...
Loading ...