Loading ...
Loading ...
Loading ...
Appliance door en
21
5. Tilt the condensate trough up and remove it (fig. %).
Clean the panels with glass cleaner and a soft cloth.
Wipe the condensate trough with a cloth and some hot
soapy water.
:Warning
Risk of injury!
■ Scratched glass in the appliance door may develop
into a crack. Do not use a glass scraper, sharp or
abrasive cleaning aids or detergents.
Risk of injury!
■ The hinges on the appliance door move when
opening and closing the door, and you may be
trapped. Keep your hands away from the hinges.
Fitting panels
1. Open the appliance door fully and refit the
condensate trough. To do this, insert the trough from
above and rotate it at the bottom (fig. !).
2. Close the appliance door fully.
3. Slide each panel back in and make sure that it is
sitting correctly at the bottom in the retainer (fig. ").
4. Push each panel in at the top (fig. #).
5. Put the cover back in place and press on it until you
hear it click into place (fig. $).
6. Open the appliance door again fully.
7. Close the two locking levers on the left and right
(fig. %).
8. Close the appliance door.
Caution!
Do not use the cooking compartment again until the
panels have been correctly fitted.
Top oven – Fitting and removing the glass
panels
To facilitate cleaning, you can remove the glass panels
from the appliance door.
The appliance door hinges each have a locking lever.
When the locking levers are closed (fig. !), the
appliance door is secured in place. It cannot be
detached.
When the locking levers are open in order to detach the
appliance door (fig. "), the hinges are locked. They
cannot snap shut.
1
2
g
2
1
Loading ...
Loading ...
Loading ...