Loading ...
Loading ...
Loading ...
24
IMPORTANT:
� If the refrigerator was previously installed and you are moving
it out of the home, before you begin, turn the refrigerator
control Off, and unplug the refrigerator or disconnect power.
Remove food and any adjustable door or utility bins from
doors.
� Two people may be required to remove and replace the
freezer drawer
Tools Needed: 1/4" hex driver
REMOVE DRAWER
Front Style 1 & 2
1. Open the freezer drawer to its full extension.
2. Loosen the two screws at the top, inside the drawer front (one
on the left-hand side and one on the right-hand side) that
fasten the drawer front to the drawer glides as shown below.
3. Remove the 2 screws at the bottom, inside the drawer front
that fasten the drawer front to the drawer glides as shown
below.
4. Lift up on the drawer front to release the plastic studs from the
drawer glide bracket slots as shown below.
Style 1 Style 2
A. Drawer glide bracket slots A. Drawer glide bracket slots
5. Slide the drawer glides back into the freezer.
Front Style 3
1. Open the freezer drawer to full extension.
2. Loosen the four screws attaching the drawer glides to the
drawer front as shown below.
NOTE: Loosen screws three to four turns. Keep the screws in the
drawer front.
A. Four Bracket screws
3. Lift drawer front upward and off the screws.
REPLACE DRAWER
Front Style 1 and 2
1. Pull out the freezer drawer glides to their full extension.
2. Holding the drawer front by its sides, align the two plastic
studs, located at the bottom, inside the drawer front, with the
drawer glide bracket slots.
NOTE: It helps if one person holds the drawer glides steady
while another person aligns the drawer front and inserts the
studs into the slots.
Style 1 Style 2
A. Drawer front screw A. Drawer front screw
B. Drawer front plastic stud
3. Replace and tighten the two screws at the top of the drawer
front (one on the left-hand side and one on the right-hand
side).
Front Style 3
1. Slide the drawer glides out of the freezer compartment.
2. Insert the screws in the top of the drawer into the slots in the
drawer brackets.
3. Completely tighten all four screws.
Door Closing and Alignment
The base grille covers the adjustable brake feet and roller
assemblies located at the bottom of the refrigerator below the
freezer drawer. Before making any adjustments, remove the base
grille and move the refrigerator to its final location.
Tools Needed: 1/4" hex driver Tools Provided: 1/8" hex key
1. Remove base grille.
BASE GRILLE
Style 1
Loading ...
Loading ...
Loading ...