Loading ...
Loading ...
Loading ...
6 EN
4 Using the
appliance
Understanding the air
quality light
PM2.5
level
Air quality
light color
Air quality
level
≤12 Blue Good
13-35 Blue-Purple Fair
36-55 Purple-Red Poor
>55 Red Very poor
The air quality light automatically goes
on when the air purier is switched on,
and lights up all colors in sequence.
After approximately 30 seconds, the
air quality sensors select the color that
corresponds to the surrounding air
quality of airborne particles.
Switching on and o
1
Put the plug of the appliance in the
wall outlet.
2 Touch to switch on the appliance
(g. i).
» The appliance beeps.
» The appliance operates under
the Pollution mode by default.
» After measuring the air quality
for a short time, the air quality
sensor automatically selects the
color of the air quality light.
3 Getting started
Installing lters
Note
• Make sure the air purier is unplugged
from the electrical outlet before
installing the lters.
• Make sure the side of the lter with the
tag is pointing towards you.
1 Remove all packaging materials of
the air purication lters (g. c).
2 Pull the bottom part of the front
panel to remove it from the
appliance (g. d).
3 Press the two clips down and pull
the pre-lter towards you (g. e).
4 Put the unpacked air purication
lters back into the appliance
(g. f).
5 Attach the pre-lter back into the
appliance (g. g).
Note
• Make sure that the side with the two
clips is pointing towards you, and that
all hooks of the pre-lter are properly
attached to the purier.
6 Reattach the front panel by pressig
the top part of the panel onto the
top of the air purier (1). Then, gently
push the panel against the body of
the air purier (2) (g. h).
7 Wash your hands thoroughly after
installing lters.
Loading ...
Loading ...
Loading ...