Loading ...
Loading ...
Loading ...
8 Trouble-shooting
… there are streaks or milky spots on the dishes
▸ Reduce the rinse agent dosage setting.
▸ If not using detergent,
All in 1 OFF
must be set in the
'User settings'.
... the dishes are wet and dull or have water marks on them
▸ Refill the rinse agent.
▸ Increase the rinse agent dosage setting.
▸ Do not open the appliance door until the end of the programme when a
long acoustic signal is emitted and the display or function light * goes out.
* Depending on model
▸ If not using detergent,
All in 1 OFF
must be set in the
'User settings'.
… there are rust stains on the items being washed
The rust stems from another source e.g. the cutlery, pans, water pipe. The ap-
pliance is made of rust-free steel.
▸ After topping up with regeneration salt, select the programme without
dishes.
… the detergent is not fully dissolved
▸ Check to see whether the spray arms are clogged or dirty.
▸ Use a different kind of detergent.
▸ Check the detergent dispenser cover.
... the time display freezes for up to 4minutes at the beginning of the
programme or during the wash cycle
▪ The water softener is being rinsed through after the regeneration process.
▪ The duration of the programme and the time display are being automatically
adjusted to the degree of soiling of the load being washed.
... there is discolouring of the baskets and plastic parts inside the
appliance
Dishes were washed that still had discolouring food leftovers on them (e.g. to-
mato or curry sauce). The discolouration may fade after a few wash cycles.
62
Loading ...
Loading ...
Loading ...