Loading ...
Loading ...
Loading ...
5 User settings
5.6 Childproof lock
The childproof lock prevents a programme
from being started accidentally.
Childproof lock OFF
When the childproof lock is on, a programme can only be started by pressing
two buttons simultaneously.
Setting the childproof lock (see page 20)
5.7 Rinse agent dosage
The rinse agent dosage is automatically adjus-
ted to the load level and the water hardness.
Rinse agent AUTOMATIC
If the drying result is unsatisfactory, then the dosage can be switched off
manually («Off» setting) or set to one of 12 levels.
▪ If the dishes are still wet or there are water spots, set the dosage to level 6
or higher.
▪ If the dishes are streaky, set the dosage to level 3.
Setting the rinse agent dosage (see page 20)
5.8 Water hardness
The built-in water softener removes limescale from the water, enabling prob-
lem-free cleaning. Automatic regeneration occurs at regular intervals, thus
guaranteeing its effectiveness.
Your appliance is equipped with an automatic limescale sensor. Configuring
the level of water hardness is therefore not necessary. The appliance automat-
ically starts the regeneration process at the right time.
After regeneration, the next programme starts by rinsing out the water softener
by pumping water through it and draining simultaneously.
For hygiene reasons, regeneration salt is also recommended for use with low
water hardness and detergents.
For information on the level of water hardness in your area, contact
your local water authority.
24
Loading ...
Loading ...
Loading ...