Loading ...
Loading ...
Loading ...
Note
Additional Information
Installing the TV to the Wall
This TV’s instruction manual only shows the
steps on preparing the installation of the TV
before installing to the wall.
Your TV can be mounted on a wall using a
Wall-Mount Bracket (not supplied) out of
the box as packaged. If the Table-Top Stand
is attached to the TV, the TV may require
detaching the Table-Top Stand; see page
(Detaching the Table-Top Stand from the
TV).
Prepare the TV for the Wall-Mount Bracket
before making cable connections.
For product protection and safety
reasons, Sony strongly recommends that
installation of your TV on the wall be
performed by qualified professionals. Do
not attempt to install it yourself.
• Follow the instruction guide provided
with the Wall-Mount Bracket for your
model. Sufficient expertise is required
in installing this TV, especially to
determine the strength of the wall for
withstanding the TV’s weight.
• The length of the screw for Wall-Mount
Bracket differs depending on the Wall-
Mount Bracket thickness. Please see
below illustration.
8 mm - 12 mm
Screw (M6)
Wall-Mount Bracket
TV’s rear cover
• Be sure to store the unused screws and
Table-Top Stand in a safe place until
you are ready to attach the Table-Top
Stand. Keep the screws away from
small children.
Note
• Read the supplied Safety Booklet for additional
safety information.
1 Detaching the Table-Top Stand from
the TV.
To detach the Table-Top Stand from the
TV, remove the screws.
KD-55X720E only
KD-49X720E, KD-43X720E only
Note
• Do not remove the Table-Top Stand for any
reason other than to install corresponding
accessories on the TV.
• Be sure the TV is vertical before turning on.
To avoid uneven picture uniformity do not
power on the TV with the LCD panel facing
down.
• When attaching the Table-Top Stand again,
be sure to fasten the screws (previously
removed) to the original holes on the rear of
the TV.
(KD-49X720E, KD-43X720E only)
• When removing the Table-Top Stand from
the TV, lay the display face down on a stable
work surface that is larger than the TV.
• To prevent damaging the surface of the LCD
display, make sure to place a soft cloth on
the work surface.
US
41
US
Loading ...
Loading ...
Loading ...