Loading ...
Loading ...
Loading ...
Cannot recognize lens. Attach it properly.
The lens is not attached properly, or the lens is not attached. If the message appears
when a lens is attached, reattach the lens. If the message appears frequently, check
whether the contacts of the lens and product are clean or not.
When attaching the product to an astronomical telescope or something similar, set
[Release w/o Lens] to [Enable].
Unable to print.
You tried to mark RAW images with a DPOF mark.
Internal temp. high. Allow it to cool.
The product has become hot because you have been shooting continuously. Turn the
power off. Cool the product and wait until the product is ready to shoot again.
You have been recording images for a long time, the product temperature has risen. Stop
recording images until the product cools.
Recording is unavailable in this movie format.
Set [ File Format] to [MP4].
The number of images exceeds that for which date management in a database file by the
product is possible.
Unable to register to the database file. Import all the images to a computer and recover
the memory card.
Image DataBase File error
There is something wrong in the Image Database File. Select [Setup] → [Recover Image
DB].
System Error
Camera Error. Turn power off then on.
Remove the battery pack, and then re-insert it. If the message appears frequently, consult
your Sony dealer or local authorized Sony service facility.
Unable to magnify.
Unable to rotate image.
Images recorded with other products may not be enlarged or rotated.
Loading ...
Loading ...