Loading ...
Loading ...
Loading ...
42
1 Preparing and using for the first time
T Insert the filter cartridge with its extension
into the water tank.
T Fill the water tank with fresh, cold water and
reinsert the tank.
E The machine automatically detects that you
have just inserted the filter cartridge.
‘Saved’
‘Filter is being rinsed’
, the filter is rinsed.
Water flows directly into the drip tray.
E If the
‘Empty drip tray’ message appears,
empty the drip tray and put it back into the
machine.
‘System is filling’
‘Machine is heating’
‘Machine is rinsing’
The rinse stops automatically. The start
screen is displayed. Your ENA is ready for
use.
E If the filter is active, this is indicated by a
blue filter symbol at the bottom of the
display.
Connecting milk
Your ENA creates fine, creamy, feather-light milk
foam with a perfect consistency. The most
important requirement for frothing milk is a milk
temperature of 4–8°C. We would therefore
recommend using a milk cooler or a milk
container.
click! click!
T Remove the protective cover from the dual
spout.
T Connect the milk pipe to the dual spout.
T Connect the other end of the milk pipe to a
milk container or a milk cooler.
Connecting an accessory (via Bluetooth)
You have the option of connecting your ENA
wirelessly to a compatible accessory (e.g. the Cool
Control Wireless milk cooler). To do this, the
receiver of the Cool Control or the JURA Smart
Connect must be plugged into the service socket.
E The Smart Connect can be protected
against unauthorised access using a PIN.
Activate the PIN function via the JURA app.
You will find more information at
www.jura.com/smartconnect.
E Please note that you can only connect either
the Cool Control or only one JURA app to the
coffee machine via Smart Connect.
Precondition:The start screen is displayed.
T Press the
‘P’ button for approximately
2 seconds to enter programming mode.
T Press the
‘`’ button.
Loading ...
Loading ...
Loading ...