User Manual Eufy T2117T11 35C RoboVac

The vacuum cleaner comes
with a rechargeable battery and charging station.

- Make sure you are within range of your Wi-Fi router.
- Make sure your Wi-Fi router is switched on.
- Make sure your smartphone is connected to your Wi-Fi
router.
- If the SSID of your network is hidden, manually search
for the hidden network you want to connect RoboVac to.

1. Make sure the Wi-Fi network name or the password
you entered is correct. If it is incorrect, please try again.
2. Check whether there are any Internet connection
problems. If the Wi-Fi signal is too weak, reset your Wi-Fi
router and try again.
3. If there are too many devices connected to your
wireless router at once, disconnect a few devices and
try again.
4. Check to see if the bottom switch on RoboVac is
turned on (in the "I" position) and make sure your
RoboVac operates normally.
5. If the issue persists, long-press the Start/Stop button
for 10 seconds to reset RoboVac. After you hear one
beep and see the Wi-Fi status light start to flash, follow
the instructions in the EufyHome app to set up the Wi-Fi
connection.

Robovac works with the voltages from 100 - 240V; a
charger for the region it is sold in is in the packaging. If you
want to use your RoboVac in other countries, you will need
to use a plug adapter

Supported Wi-Fi networks:
- IEEE 802.11b (Not recommended)
- IEEE 802.11g
- IEEE 802.11n (Support only for 2.4GHz)
RoboVac does not support 5GHz networks.