Loading ...
Loading ...
Loading ...
5
TEMPERATURE SETTING GUIDE
L
abel marking
Dot setting
j cool – nylon, acrylics, polyester
•
k warm – wool, polyester mixtures
• •
l hot – cotton, linen
• • •/max
i do not iron
If the instructions on the fabric label differ from this guide, follow the instructions on
the label.
FILLING
You may use the iron with tap-water, but if you live in a hard water area, you should
use distilled water (not chemically descaled or softened water).
If you buy distilled water, check that it’s suitable for use in irons.
1. Set the temperature control to • set the steam control to
S
.
2. Unplug the iron.
3. Pour water into the water inlet.
4. Pour slowly, and try to pour down one side of the inlet, to allow the air in the
reservoir to escape, otherwise you’ll cause an air lock and the water will
overflow.
5. Don’t fill past the max mark on the reservoir.
6. Wipe up any spillage.
SWITCH ON
1. Set the temperature control to • set the steam control to
S
.
2. Stand the iron on its heel.
3. Put the plug into the power socket (switch the socket on, if it’s switchable).
4. Turn the temperature control to bring the setting you want next to the mark.
The light will come on.
5. When the iron reaches the temperature you set, the light will go off. It’ll then
cycle on and off as the thermostat operates to maintain the temperature.
Loading ...
Loading ...
Loading ...