Loading ...
Loading ...
Loading ...
4
• Don’t use the appliance for any purpose other than those described in these
instructions.
• Don’t scratch the soleplate – avoid buttons, zips, etc.
• Don’t wrap the cable round the appliance
• The appliance has a protective thermal fuse, which will blow if it overheats. If
this happens the appliance will stop working and must be returned for repair.
HOUSEHOLD USE ONLY
PARTS
1. Spray nozzle
2. Water inlet
3. Steam control
4. Mark
5. Temperature control
6. Ready light
7. Soleplate
8. Voltage switch
BEFORE USING FOR THE FIRST TIME
• Remove labels, stickers and packing from the iron and soleplate.
• Don’t worry if the iron smokes a bit at first because it will soon stop.
• Iron an old piece of cotton fabric, to clean the soleplate.
CHECK THE VOLTAGE BEFORE USE
1. Check the local voltage.
2. The voltage switch is under the rear of the iron.
3. Set the voltage switch to 115V for a local voltage of 100-120 volts a.c., set it to
230V for a local voltage of 220-240 volts a.c.
4. Using the wrong setting will probably damage the iron beyond repair.
• On lower voltages, the iron may take longer to heat up.
TRAVEL ADAPTOR
Use an earthed travel adaptor suitable for the wall sockets in the area you’re visiting.
PREPARATION
1. Check for textile care symbols (i j k l).
2. Iron fabrics needing low temperatures j first, then those that need medium
temperatures k, and finish with those needing high temperatures l.
Loading ...
Loading ...
Loading ...