TurboLock TL-201-BZ User Manual

Loading ...

8 TurboLock TL - 201

2.3 Battery Information

The lock requires four standard or rechargeable ‘AA’ batteries which will be stored inside the back of the lock. New batteries

should be installed as soon as possible after receiving any low battery indication. After that rst notication, the lock will only

have enough power for approximately 50 uses before the batteries are fully depleted. This indication can be received from the

lock itself; the lock will beep after being unlocked. Expected battery life is approximately 365 days.

Section 3

Installation (Retrot)

This section details installation steps needed if you are installing the TL-201 on a door with a single cutout already

made. Replacing an older xture with a newer one is known as a retrot. If your door has never had a lock or

doorknob installed or otherwise has no cutout, please skip to page 13.

• For easier installation, have another person help hold the lock.

• Remove all parts of any old lock before installing the TL-201. In some cases, the old strike plate and/or box may be used.

• For your convenience, installation instructions are broken into segments. Read and follow the instructions for both Pre-

Installation and Main Installation.

• If your door happens to have two cut-outs, check the clearance between the two. Make sure there is enough distance so that

you may seal o󰀨 any extra opening.

3.1 Pre-Installation

Part 1 Installing the Latch

KEEP DOOR OPEN AT ALL TIMES SHORTLY BEFORE, DURING AND SHORTLY AFTER INSTALLATION. If the lock is

incomplete or improperly installed, the lock and/or door may become stuck.

Loading ...

TurboLock TL-201-BZ Lock