Loading ...
Loading ...
Loading ...
15
KO
EN
6. Troubleshooting
NO.
Malfunction Possible Causes Solutions
1
Remote Control
does not work
WINBOT 8 is cleaning. When
WINBOT 8 is cleaning, only the
START/PAUSE Button works on
the Remote Control.
Pause WINBOT 8 by pressing
the START/PAUSE button on the
robot or Remote Control. Other
buttons on the Remote Control
will function when WINBOT 8 is
paused.
The Remote Control is not
paired with WINBOT 8.
WINBOT 8 arrives from the
factory paired with its Remote
Control. If the Remote Control
becomes un-paired or is
replaced, it can be re-paired.
Power ON WINBOT 8. At the
same time, press and hold
button on WINBOT 8 and
button on the Remote Control.
Paring is complete when START/
PAUSE Button blinks RED, BLUE
and GREEN.
WINBOT 8‘s Status Indicator
Light is glowing RED.
Reset WINBOT 8 by pressing the
RESET Button on the Remote
Control.
2
Status Indicator
Light ashes BLUE
after WINBOT 8 is
placed on the glass
The Cleaning Pad is attached
incorrectly and is covering the
Fan or the Edge Detection
Sensors.
Remove the Cleaning Pad and
re-attach it making sure it is
placed exactly within its Velcro
area and does not cover the Fan
or Edge Detection Sensors.
Edge Detection Sensor
malfunction.
A. Clean the Edge Detection
Sensors as described in Section 4.
B. If the problem persists, please
contact Customer Service.
Fan malfunction.
A. Clean the Fan as described in
Section 4.
B. If the problem persists, please
contact Customer Service.
Glass is too dirty for WINBOT 8
to adhere properly.
Clean a small area on the glass
before use and place WINBOT 8
there.
Loading ...
Loading ...
Loading ...