Loading ...
Loading ...
Loading ...
14
EN
4. Maintenance
5. Status Indicator Light and Sound
4.3 Driving Treads
ON
Move the Power Switch to the “I” position.
Press and hold the robot’s START/PAUSE
Button for 5 seconds to stop the Fan.
Turn WINBOT 8 over. Inspect the Driving
Treads by using the and buttons on the
Remote Control. Stop the Driving Treads if
dirt is seen on the Treads.
Move the Power Switch to the “O” position.
Clean any dirt on the Driving Treads with the
provided Finishing Cloth.
Indicator Description
Status Indicator Light
ashes GREEN
Back Up Battery is low and is charging. WINBOT will not clean until
the Back-Up Battery is properly charged.
Status Indicator Light
ashes BLUE
WINBOT 8 is powered ON and is ready to be placed on the glass.
Status Indicator Light
glows a continuous BLUE
WINBOT 8 has successfully adhered itself to the glass and is ready
to clean.
Status Indicator Light
glows RED
WINBOT 8 has a problem. Please refer to Section 6,
Troubleshooting, for details.
WINBOT Emits beeps
WINBOT 8 beeps in following situations:
WINBOT 8 is powered ON.
WINBOT 8 nishes cleaning.
WINBOT 8 has a problem.
Loading ...
Loading ...
Loading ...