Loading ...
Loading ...
Loading ...
84
MAINTENANCE AND LUBRICATION
Steering / Suspension
Steering Assembly
Check the steering assembly of the vehicle periodically for loose nuts
and bolts. If loose nuts and bolts are found, see your Polaris dealer for
service before operating the vehicle.
Handlebar Adju stment
1. Remove the upper
headlight pod.
2. Loosen the four bolts.
3. Adjust the handlebars to the
desired height. Be sure the
handlebars do not contact the gas
tank or any other part of the
machine when turned fully to the
left or right.
4. Torque the front two bolts first.
5. Torque the rear two bolts last.
=14-17 N-m
NOTE: A gap of up to 3 mm should remain at the rear bolts.
WARNING
Improper adjustment of the handlebars or incorrect torquing of
the adjuster block tightening bolts can cause limited steering or
loosening of the handlebars, resulting in loss of control. Follow
the adjustment procedures exactly, or see your Polaris dealer for
service.
Loading ...
Loading ...
Loading ...