Loading ...
Loading ...
Loading ...
73
MAINTENANCE AND LUBRICATION
Oil and Filter Change
Oil Pump Priming
Prime the oil pump when
the oil hose connection
between the oil tank and
pump inlet has been
disconnected.
1. Clamp or pinch off the
vent line approximately
5 cm from the oil tank,
between the end of the oil
tank vent fitting (A) and t he
vent line’s pressure relief slit (B).
2. Start the engine. Allow it
to idle for 10-20 seconds.
3. Turn the engine off.
4. Remove the clamp. If the line is bled properly, you should hear a
rush of air, indicating that the line i s properly primed and ready for
operation. If you do not hear air, the line was not bled properly.
Repeat the priming procedure.
5cm
A
B
Loading ...
Loading ...
Loading ...