Loading ...
Loading ...
Loading ...
19
Oven Controls
Setting Self Clean
To set Select Clean to start immediately:
1. Be sure the oven in empty and all oven racks are removed.
Remove all items from the cooktop. Be sure the oven door is
completely closed.
2. Press Self Clean.
3:00 appears in the display.
3. To change to a 2 hour clean time press ; 2:00
appears in the display. To select a 4 hour clean time press
: The display will show 4:00.
4. After selecting the clean time release the arrow key for the
oven control to activate the self clean. The DOOR LOCKED
indicator light will turn on and CLn will appear in the dis-
play.
5. When Self Clean begins the cleaning cycle, the motorized
door latch mechanism will automatically start to lock the
oven door and the DOOR LOCKED indicator light will flash.
Do not open the oven door when the DOOR LOCKED
indicator light is flashing. Allow about 15 seconds for the
oven door to completely lock.
Once the oven door is locked the DOOR LOCKED indicator light
will glow steady. When CLn appears in the display Self Clean
is active.
Use caution when opening the oven door after
self cleaning. The oven may still be VERY HOT and can cause
burns. To avoid possible burns stand to the side of the oven
when opening the oven door to allow hot air or steam to
escape.
When Self Clean is finished:
1. The time of day will appear in the display window and the
and the DOOR LOCKED indicator light will continue to glow.
2. Once the oven has cooled down (about 1 hour) and the
DOOR LOCKED indicator light has turned off the oven door
may be opened.
3. When the oven interior has completely cooled, wipe away
any residue or powdered ash with a damp cloth or paper
towel.
Delayed Start Self Clean:
To start Delay Start Self Clean:
1. Be sure the oven is empty and all oven racks are removed.
Remove all items from the cooktop. Be sure oven door is
completely closed.
2. Be sure the clock shows the correct time of day.
3. Press Delay Start.
4. Press and hold to scroll to the time desired to start
the self clean cycle. and release arrow key when the
desired start time is displayed.
5. Press Self Clean.
-- appears in the display.
6. Press if a 3 hour clean is desired. To select a 2 hour
clean time press , the display will show 2:00. To
select a 4 hour clean time press until 4:00 appears
in the display.
7. After selecting the desired clean time release arrow key.
Self Clean is set to activate. The DOOR LOCKED indicator
light will turn on and the oven door will lock in advance of
the starting time. Once the starting time is reached CLn will
appear in the display.
If it becomes necessary to stop Self Clean when active
1. Press .
2. If Self Clean has heated the oven to a high temperature,
allow enough time for the oven to cool and for the DOOR
LOCKED indicator light to turn off. When this indicator light
turns off the oven door may be opened.
3. Restart Self Clean if needed.
Important notes:
If Self Clean is active and a power failure occurs, the oven may
not have thoroughly cleaned. This would depend on how much
cleaning time had elapsed before the power failure. If needed
after power is restored, set Self Clean again.
STOPSTOP
Loading ...
Loading ...
Loading ...