Loading ...
Loading ...
Loading ...
13
Oven Controls
Silent or Audible Control Mode
The oven control is factory preset with audible tones active. The
control may be programmed for silent operation.
To block the control from sounding when any key is pressed,
press and hold Delay Start key until the control beeps once
(about 6 seconds).
To return to the audible control mode, press and hold Delay
Start key until the control beeps once (about 6 seconds).
Changing Temperature Display (ºF or ºC)
The electronic oven control is set to display °F (Fahrenheit) when
shipped from the factory. The display may be changed to show
either Fahrenheit or ºC (Celsius) oven temperatures.
To change temperature display mode from °F to °C or from
°C to °F
1. Press Broil.
2. Press .
3. Press and hold Broil until F or C appears in the display.
4. Press either or to toggle between F or C mode
choices and release the arrow key.
5. The display will sound an acceptance tone and the display
will return to the time of day.
Important note:
The temperature display mode cannot be changed when the
oven is set for cooking.
Oven Lock
The OVEN LOCK feature allows you to lock the oven portion of
the appliance while the oven is not in use.
To activate OVEN LOCK feature:
1. Be sure the door is completely closed.
2. Press and hold STOP for 3 seconds. Loc will appear in the
display.
3. The DOOR LOCKED indicator light will flash while the
motor driven door latch begins locking the oven door. Do
not open the door during this time. Allow 15 seconds for the
door to completely lock.
4. Once oven door is locked, the time of day will appear in
the display.
To cancel the OVEN LOCK feature
Important note: Cancelling the Oven Lock feature does not work
while oven is in self clean.
1. Press and hold STOP for 3 seconds. The DOOR LOCKED
indicator light will flash and the motor driven door latch will
begin to unlock. Do not open the door at this time. The door
will unlock completely in about 15 seconds.
2. The oven control keys will be available and the oven door
can be opened again.
Important notes:
• To avoid possible damage to the oven door latch
mechanism, do not attempt to open or close the oven door
whenever the DOOR LOCKED indicator light is flashing. If a
control key is pressed when the OVEN LOCK is active, Loc
will appear in the display as a reminder that the oven keys
are inactive when the OVEN LOCK feature is active.
Changing between Continuous Bake setting or 12-Hour
Energy Saving feature
The oven control has a factory-preset 12-Hour Energy Saving
feature that will turn the oven off automatically if the oven is
left on for more than 12 hours. The control may be programmed
to override this feature to continuously bake.
To change to continuous bake mode
Press and hold Timer ON/OFF until the control beeps once
(about 6 seconds).
- - hr will appear in display. The control is
set for continuous bake setting.
To change to 12-Hour Energy Saving feature:
Press and hold Timer ON/OFF until the control beeps once
(about 6 seconds). 12hr will now appear in display. The
control is set for 12-Hour Energy Saving feature.
Important note:
Changing between continuous bake and the 12-Hour Energy
Saving mode does not change how the cooktop controls
operate.
Operating Oven Lights
The interior oven lights will automatically turn on when the oven
door is opened.
Press to turn the interior oven lights on and off whenever
the oven door is closed.
The interior oven lights are located on the rear wall of the oven
interior and are covered with a glass shield. The glass shield
protects the bulb from high temperatures and should always be
in place whenever the oven is in use.
To replace the interior oven light, see “Replacing the Oven
Light” on page 21. The oven light will not operate during a self
clean cycle.
Loading ...
Loading ...
Loading ...