Loading ...
Loading ...
Loading ...
EN 18
Electrical connection
230 - 240V - 50Hz - 1.1 W
The electrical connection must comply with national and local
regulations.
• Wall socket and plug must be accessible at all times.
• If you want to make a fixed connection, ensure that a multi-pole
switch with a distance between contacts of 3 mm is installed in the
supply cable.
• Do not use an adapter or an extension lead to connect the
device to the electrical mains. Safe use of the device cannot be
guaranteed with these accessories.
Warning!
This appliance must be earthed.
Installation, maintenance or repairs should only be carried out by
professionals who are authorized by the manufacturer, as failure to do
so will void the warranty.
The device should be disconnected from the mains prior to installation,
maintenance or repairs. The device is only disconnected from the
electric power if:
• the main switch of the electrical wiring/installation in the house is
switched off, or
• the fuse for the electrical wiring/installation in the house has been
completely removed, or
• the plug has been pulled out of the socket.
Faulty parts may only be replaced by original Asko parts. Only those
parts are guaranteed by Asko to meet the safety requirements.
If the connecting cable is damaged, it may only be replaced by the
manufacturer, the manufacturer’s service organisation or equivalently
qualified persons, in order to avoid dangerous situations.
INSTALLATION
Loading ...
Loading ...
Loading ...