Loading ...
Loading ...
Loading ...
−See pages for important safety
information and warnings about how to
properly position seats and seat-backs.
13
15
The controls for the adjustable
driver’s power seat are on the
outside edge of the seat bottom. You
can adjust the power seat with the
ignition switch in any position. Make
all seat adjustments before you start
driving.
Moving the long horizontal switch
adjusts the seat bottom in several
directions. The seat bottom adjusts
in the direction you move the switch.
The short vertical switch adjusts the
seat back angle.
Both front seats are equipped with
seat heaters. The driver’s seat has
heaters in both the seat-back and
seat cushion, but because of the
sensors for the side airbag system,
there is no heater in the passenger’s
seat-back. The ignition switch must
be in the ON (II) position to use the
heaters.
If the engine is left idling for an
extended period, do not use the
seat heaters even on the LO
setting. It can weaken the battery,
causing hard starting.
Use the HI setting only to heat the
seats quickly, because it draws
large amounts of current from the
battery.
Follow these precautions whenever
you use the seat heaters:
In LO, the heater runs continuously.
It does not cycle with temperature
changes.
In HI, the heater turns off when the
seat gets warm, and turns back on
after the seat temperature drops.
After the seat reaches a comfortable
temperature, select LO by pushing
the back of the switch. This will keep
the seat warm.
Adjusting the Driver’s SeatSeat Heaters
Seat Heaters, Seats
Instruments and Controls
85
０５／０９／０２ １１：４５：３３ ３１ＳＤＲ６１０ ００８８
Main Menu
Table of Contents
Loading ...
Loading ...
Loading ...